BRAKE PEDAL AND BRACKET - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › BRAKE PEDAL AND BRACKET - Nissan 240SX 1991-1992 Workshop Manual
BRAKE PEDAL AND BRACKET
BRAKE PEDAL AND BRACKET
Adjustment Check brake pedal free height from dash reinforcement panel. Lock nut Adjust if necessary. (C) 16 - 22 (1.6 - 2.2, 12 - 16) Input rod H: Free height Refer to S.D.S. D: Depressed height Refer to S.D.S. Under force of 490 N (50 kg, 110 Ib) with engine running . “yf Stop lamp switch Ci: Clearance between pedal stopper and threaded ot © and A.S.C.D. switch / end of stop lamp switch () 12-15 / J} Gs”
0.3 - 1.0 mm (0.012 - 0.039 in) (1.2 -1.5,9- 11) C2: Clearance between pedal stopper and threaded { \ end of A.S.C.D. switch
0.3 - 1.0 mm (0.012 - 0.039 in) A: Pedal free play oN<N <2
1-3 mm (0.04 - 0.12 in) . Say Dash insulator Os Dash insulator _ ——_—— <e
Floor carpet
AVTVTVVSSAS SASS
> CZ A LA hank huh, huh LC hnkdhe Floor panel
AL Melt sheet
) : Nem (kg-m, ft-lb) SBR153A
Adjust pedal free height with brake booster input rod. Then
1. tighten lock nut. ee Stays inside ee Make sure that tip of input rod stays inside. eA ___ [=| f J
L cru pin
Input rod Lock nut SBR930
2. Adjust clearance ‘‘C,”’ and “C2” with stop lamp switch and A.S.C.D. switch respectively. Then tighten lock nuts.
3. Check pedal free play. Make sure that stop lamp is off when pedal is released. Check brake pedal’s depressed height while engine is
4. running. If depressed height is below specified value, check brake system for leaks, accumulation of air or any damage to components (master cylinder, wheel cylinder, etc.); then make necessary repairs.
BR-7
Parts & tools for this job For Nissan 240SX
- PARTBrake padsSearch: Nissan 240SX brake pads
- TOOLBrake bleeder kitSearch: one man brake bleeder kit
- FLUIDBrake fluidSearch: brake fluid
As an Amazon Associate we earn from qualifying purchases.