TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
TROUBLE DIAGNOSES
TROUBLE DIAGNOSES
Diagnostic Procedure 5 (Cont’d)
® DISCONNECT
DIAGNOSTIC PROCEDURE 5-3
Ane Turn ignition switch and lighting switch OFF, Push control unit connector O | Vv Disconnect push control unit Jn] harness connector. L/OR
‘ N.G.
CHECK POWER SUPPLY
> Check 10A fuse at fuse block. RHA431A HD OF
FOR PUSH CONTROL UNIT.
(Refer to “POWER SUPPLY 5 Do approx. 12 volts exist be- ROUTING” in EL section and tween push control unit harness
A/C ELECTRICAL CIRCUIT.)
DISCONNECTE> @) terminal No. (4 and body ground? Push control unit E | OK. Note connector O
CHECK BODY GROUND
17]
CIRCUIT FOR PUSH CON-
"NU
TROL UNIT.
Does continuity exist between RHA778B push control unit harness ter-
minal No. @2) and body ground?
| O.K. A Replace control amp. built-in push control unit.
Note: If the result is N.G. after checking circuit continuity, repair harness or connector.
HA-95
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.