TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
TROUBLE DIAGNOSES
TROUBLE DIAGNOSES
Self-diagnosis (Cont'd)
@) 4 N.G. Check harness continuity be-
CHECK INPUT SIGNAL OF
tween A/T control unit and
FLUID TEMPERATURE
terminal cord assembly. SENSOR. 1, ~ an, Lg
@ Select “E.C.U. INPUT SIGNALS”. @ Read out the value of “FLUID TEMPER-
ATURE SENSOR”.
Voltage:
Cold [20°C (68°F)] >
Hot [80°C (176° F)]: Approximately
1.5V > 0.5V OR Check voltage between A/T control unit terminal @3) and ground while warming up A/T. Voltage:
Cold [20°C (68°F)] >
Hot [80°C (176°F)] : Approximately
1.5V > 0.5V
|[_cunt T_[°| CONNECTOR ||
O.K. Vv es N.G. Perform self-diagnosis after
1. Perform A/T control unit Vv driving for a while. input/output signal inspection.
2. If N.G., recheck A/T control O.K. unit pin terminals for damage Vv or connection of A/T control
INSPECTION END
unit harness connector.
SAT990B
AT-53
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.