TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
TROUBLE DIAGNOSES
TROUBLE DIAGNOSES
Hl i J, penae nie =f
Diagnostic Procedure 7 — Hesitation when the
Engine is Hot
1) Yes
CHECK FUEL VAPOR.
Check fuel properties. Vv
1. Disconnect fuel pressure regulator vacuum hose and plug hose.
2. Perform cruise test.
3. Does the hesitation disappear? No SEF838K Vv Yes Check purge and vacuum
CHECK CANISTER PURGE.
LQ Te UI
Vacuum line
j=
2 Vv lines.
1. Disconnect canister purge line hose LY.
Vabor line | \
Purge line [ and plug hose.
2. Perform cruise test. = \=
3. Does the hesitation disappear? No Vv
INSPECTION END
SEF750K
Diagnostic Procedure 8 — Hesitation when the
Engine is Cold
1]
CHECK SPARK PLUGS.
N.G. ,| Repair or replace spark
Remove spark plugs and check for plug(s). fouling, etc. O.K. v
CHECK FOR INTAKE AIR LEAK.
Yes p| Discover air leak location
SEF879J When pinching blow-by hose (lowering and repair. the blow-by air supply), does the en- gine speed rise? No
Trouble is fixed. y Replace air flow meter.
TRY A KNOWN GOOD AIR FLOW
r METER. Trouble is not fixed. 4] v SEF300G
CHECK FOR INTAKE VALVE DEPOS-
ITS. lf there are deposits on intake valves, remove them.
Vv
INSPECTION END
EF & EC-70
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.