TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
TROUBLE DIAGNOSES
TROUBLE DIAGNOSES
A/T Shift Lock System (Cont'd)
(ra) E> (34 N.G. Check key switch. HR
CHECK INPUT SIGNAL
(Refer to “COMPONENT
(KEY SWITCH).
CHECK”.)
1. Reconnect control unit har- Control unit Y/R terminal ness connector.
2. Coq When ignition key cannot be SAT985D removed, even if selector lever cor 5 is in “’P’’ position, use emergency lever.
3. Check voltage between con- trol unit terminal (1) and ground. Control unit Y/R OV terminal O.K. 4 N.G. Check the following items: Gs) SAT985D
1. Harness continuity between control unit harness terminal (1) and key switch harness
2. Check voltage between con-
terminal @).
trol unit harness terminal (1)
2. Harness continuity between and ground. key switch harness terminal Battery voltage should exist. (4) and fuse O.K.
3. Key switch (Refer to ‘‘COM- Vv
PONENT CHECK”.)
CHECK INPUT SIGNAL
(DETENTION SWITCH—KEY).
1. N.G. SAT627C Check detention switch—key. (Refer to “COMPONENT CHECK”.) COE (34
[4] 2. Set selector lever in ““P”’
position and release selector lever button.
3. Check voltage between (SI > control unit harness ter- Control unit LW terminal minal (2 and ground. OV O.K. SAT994D
) AT-96
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.