TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
TROUBLE DIAGNOSES
TROUBLE DIAGNOSES
Diagnostic Procedure 17 — Lack of Power and
1
MH FUEL PRES RELEASE
Stumble
FUEL PUMP WILL STOP BY
i
TOUCHING START IN IDLING.
CHECK FUEL PRESSURE.
N.G. Check fuel pressure reg-
ENGINE STEEE, UMES AFTER
—
1. Perform “FUEL PRESSURE
md ulator diaphragm. RELEASE” in “WORK SUPPORT” mode in order to ly release fuel pressure to zero. START
2. Install fuel pressure gauge and check fuel pressure. y A few seconds after ignition
switch is turned OFF to ON:
Approx. 294 kPa (3.0 kg/cm’, 43 psi) At idle: Approx. 235 kPa (2.4 kg/cm?, 34 psi) : OR w
tis’, 1. Release fuel pressure to zero.
0:0) (Refer to page EF & EC-191.)
. Install fuel pressure gauge SEF3791 and check fuel pressure. O.K. | Blow-by
CHECK FOR INTAKE AIR LEAK.
Yes Discover air leak location hose When pinching blow-by hose (lowering and repair. lg the blow-by air supply), does the en- ASS gine speed rise? No Vv
INSPECTION END
SEF300G
EF & EC-89
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.