OIL PAN - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › OIL PAN - Nissan 240SX 1991-1992 Workshop Manual
OIL PAN
OIL PAN
Removal Filler cap
1. Raise vehicle and support it with safety stands.
2. Drain engine oil.
Ys
3. Remove the following parts.
LE J is —
e@
Power steering tube
Loosen e Front stabilizer bar securing bolts and nuts from side
AVA a
member. J paris Ma,
vor Ws /|
@
Both left and right side engine mounting bolts. Refer to
Yui ae:
“ENGINE REMOVAL”.
e Gussets
a ee: ia)
Ds su
jw.
(aaa im)
4.
Disconnect lower steering joint.
HIN ”\ rr ORY!
5. Remove front suspension member. a: Remove bolts or nuts. TEN nf | \ SEMeosD
Za ae!
me ne LE
SEM608D > —-_-= Remove oil pan. Insert Tool between cylinder block and oil pan. — Do not drive seal cutter into oil pump or rear oil seal retainer portion, or aluminum mating face will be damaged. @ Do not insert screwdriver, or oil pan flange will be de- formed.
(2) Slide Tool by tapping its side with a hammer, and remove oil pan.
SEM257D EM-9
Parts & tools for this job For Nissan 240SX
- PARTOil filterSearch: Nissan 240SX oil filter
- TOOLOil filter wrenchSearch: oil filter wrench
- FLUIDEngine oilSearch: Nissan 240SX engine oil
As an Amazon Associate we earn from qualifying purchases.