METER AND GAUGES - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › METER AND GAUGES - Nissan 240SX 1991-1992 Workshop Manual
METER AND GAUGES
METER AND GAUGES
Inspection/Fuel Gauge and Water Temperature
Gauge
C INSPECTION START »
| Digital a
~ O.K. y
CHECK POWER SOURCE.
Check the following items. z 1) Turn ignition switch “ON”. N.G.| 1) Harness continuity between 2) Check voltage between —> battery terminal and
terminal @ and ground.
combination meter
Needle type Battery voltage should exist. 2) Ignition relay (Fuel)
® (Temp) s__
© (Temp.) 4
3) Fusible link and fuse O.K. 4) Ignition switch y N.G. °
CHECK GAUGE OPERATION.
> Repair or replace gauge. 2} ©) (Fuel) rial 1) Turn ignition switch “ON”. an 2) Connect terminals (8) (Fuel), (® (Temp.) and ground with
e ® and © : Fuel gauge .
wire for less than 10 seconds. ©) and ©: Water temperature gauge SEL901P_ 3) Check operation of gauge. Gauge should move smoothly (® (Temp.) Digital type to full scale. (Fuel) O.K. y N.G. { Check harness continuity >| Repair or replace.
oA (Temp.)
between component and
combination meters (©) (Fuel),
and 4 Fuel gauge
oo © (Temp.). and ©: Water temperature gauge O.K.. SEL902P N.G.
CHECK COMPONENT.
x Repair or replace. Check gauge units and harness. Refer to FE section. (Fuel gauge) Refer to ‘“‘Fuel Tank Gauge Unit Check” or “Thermal Transmitter Check’’. O.K. N Reinstall any part removed.
y
4 INSPECTION END +
ee
gr er
re
EL-58
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.