ENGINE MAINTENANCE - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › ENGINE MAINTENANCE - Nissan 240SX 1991-1992 Workshop Manual
ENGINE MAINTENANCE
ENGINE MAINTENANCE
Changing Spark Plugs
1. Disconnect ignition wires from spark plugs at boot. Do not pull on the wire.
2. Remove spark plugs with spark plug wrench. Spark plug: Standard type BKR5E-11 Cold type 16 mm BKR6E-11 (0.63 in) BKR7E-11
SEM294A
3. Check plug gap of each new spark plug. Side electrode Gap: 1.0 - 1.1 mm (0.039 - 0.043 in)
4. Install spark plugs. Reconnect ignition wires according to Nos. indicated on them. Spark plug: (CO): 20 - 29 N-m (2.0 - 3.0 kg-m, 14 - 22 ft-lb)
Checking Vapor Lines QQ Vacuum line
1. Visually inspect vapor lines for improper attachment and OX
foe I / \
Purge line for cracks, damage, loose connections, chafing and deteri- oration. \ S
2. Inspect vacuum relief valve of fuel tank filler cap for clogging, sticking, etc. Refer to EVAPORATIVE EMISSION CONTROL SYSTEM INSPECTION in section “EF & EC’’.
Carbon canister SEF750K _—_—— a *
Checking Valve Clearance
Refer to “CYLINDER HEAD” in section “EM’’, if engine runs with unusual mechanical noise.
MA-13
Parts & tools for this job For Nissan 240SX
- PARTEngine gasket setSearch: Nissan 240SX engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
As an Amazon Associate we earn from qualifying purchases.