TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
TROUBLE DIAGNOSES
TROUBLE DIAGNOSES
Preliminary Check
PRELIMINARY CHECK 1
Intake door is not set at “FRESH” in DEF or FOOT mode. No Go to Diagnostic Procedure 3. Is intake door in “Fresh” position N when REC switch is turned from ON to OFF at VENT, B/L or FOOT mode with ignition switch at ON and fan speed at 4? (Can you hear air moving from the intake unit?)
Yes N No Vv Go to Diagnostic Procedure 3. Is intake door in ‘“REC” position when REC switch is turned from OFF to ON at VENT, B/L or FOOT mode with ignition switch at ON and fan speed at 4? (Can you hear air moving from the intake unit?
Yes N
Is intake door in ‘‘Fresh” position
No > Replace control amp. built-in
when F/D switch or DEF switch
push control unit.
is pushed? (Can you hear air moving from the intake unit?) Yes Vv
INSPECTION END
HA-68
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.