TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
TROUBLE DIAGNOSES
TROUBLE DIAGNOSES
Self-diagnosis (Cont'd)
REVOLUTION SENSOR CIRCUIT CHECK
Revolution N.G.
Repair or replace revolution sensor ») sa SENSOR. — Refer to ‘’Electrical sensor. Components Inspection’’. O.K. Al ‘ N.G.
CHECK REVOLUTION
CHECK INPUT SIGNAL.
Check harness continuity be- v
25. 35
1. tween A/T control unit and A/T control unit AS, revolution sensor. SAT965B
2. @ Select “E.C.U. INPUT ~ SIGNALS”. @ Read out the value of “CAR SPEED SENSOR 1” while driving. @ Check the value chang- es according to driving speed.
OR ®) Check voltage between A/T control unit terminal (25) and ground while driving. Lossr eta (Measure with A.C. range.) Voltage: At 0 km/h (0 MPH): | FECOED | OV At 30 km/h (19 MPH): 1V or more SAT320C (Voltage rises gradually in response to vehicle speed.)
O.K. Vv Perform self-diagnosis again after N.G.
1. Perform A/T control unit driving for a while. input/output signal inspection.
2. If N.G., recheck A/T control O.K. unit pin terminals for damage v or connection of A/T control!
INSPECTION END
= ’ [
C/UNIT [°| CONNECTOR ]|
unit harness connector. HS.: 25 €> on
> @® y,
> SAT976B
AT-45
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.