REAR DISC BRAKE (CL9H) - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › REAR DISC BRAKE (CL9H) - Nissan 240SX 1991-1992 Workshop Manual
REAR DISC BRAKE (CL9H)
REAR DISC BRAKE (CL9H)
Removal and Installation @ Release parking brake. @ Disconnect parking brake cable and brake hose, then remove caliper assembly.
Disassembly
1. Remove piston by turning it counterclockwise with suitable longnose pliers.
SBR646
2. Pry off ring A from piston with suitable pliers and remove adjusting nut.
SBR889
3. Disassemble cylinder body. @ Pry off rings B and C with pliers, then remove spring cover, spring and seat.
SBR891 @ Remove piston seal. Be careful not to damage cylinder body.
SBR485A
BR-17
Parts & tools for this job For Nissan 240SX
- PARTRear brake padsSearch: Nissan 240SX rear brake pads
- TOOLCaliper piston rewind toolSearch: brake caliper piston rewind tool
- FLUIDBrake fluidSearch: brake fluid
As an Amazon Associate we earn from qualifying purchases.