CYLINDER BLOCK - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › CYLINDER BLOCK - Nissan 240SX 1991-1992 Workshop Manual
CYLINDER BLOCK
CYLINDER BLOCK
Inspection (Cont'd) e If both cylinder block and piston are replaced with new Piston grade number ones, select piston of the same grade number punched on cylinder block upper surface.
PPOO! Co Front
SEM257C
3. Measure piston skirt diameter. Piston diameter ‘“A’’: Refer to S.D.S. Measuring point ‘‘a’”’ (Distance from the top): 52 mm (2.05 in)
4. Check that piston-to-bore clearance is within specification. Piston-to-bore clearance ‘“‘B”’:
0.020 - 0.040 mm (0.0008 - 0.0016 in)
SEM258C
5. Determine piston oversize according to amount of cylinder wear. Oversize pistons are available for service. Refer to S.D.S.
6. Cylinder bore size is determined by adding piston-to-bore clearance to piston diameter ‘‘A’”’. Rebored size calculation: D = A + B-C where, D: Bored diameter A: Piston diameter as measured B: Piston-to-bore clearance C: Honing allowance 0.02 mm (0.0008 in)
7. Install main bearing caps, and tighten to the specified torque to prevent distortion of cylinder bores in final assembly.
8. Cut cylinder bores. @ When any cylinder needs boring, all other cylinders must also be bored. e Donotcut too much out of cylinder bore at a time. Cut only
0.05 mm (0.0020 in) or so in diameter at a time.
9. Hone cylinders to obtain specified piston-to-bore clear- ance.
10. Measure finished cylinder bore for out-of-round and taper. @ Measurement should be done after cylinder bore cools down. CRANKSHAFT
1. Check crankshaft main and pin journals for score, wear or cracks.
2. With a micrometer, measure journals for taper and out-of- round. Vy Out-of-round (X — Y): Less than 0.005 mm (0.0002 in) Taper (A — B): Less than 0.002 mm (0.0001 in) A—8B Taper: Out-of-round: X — Y SEM316A EM-38
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.