Workshop Manuals Factory service & repair Nissan and Datsun
01 QUICK REFERENCE INDEX02 Front Cover03 Foreword04 Table of Contents05 General Information06 Windshield Header Trim07 Windshield Header Molding08 Weatherstrips and Retainers09 Rear Seat10 Quarter Trim Panel11 Quarter Window and Regulator12 Door and Door Window13 Seat Belts14 Back and Quarter Belt Moldings15 Headliner Assembly16 Top Cover Assembly17 Backlite Assembly18 Stay Pads, Side and Rear19 No. 1 Bow20 No. 2 Bow21 No. 3 Bow22 No. 4 Bow23 Rear and Side Rail24 Hydraulic System25 Electrical26 Deck Lid Hinge and Trunk Trim27 Body Structural28 Index29 Back Cover30 QUICK REFERENCE CHART
Nissan and Datsun Nissan 240SX 1991-92 Workshop Manual01 · QUICK REFERENCE INDEX
01 · General

CHASSIS AND BODY MAINTENANCE - Nissan 240SX 1991-1992 Workshop Manual

Make
Nissan and Datsun
Model
240SX Nissan 240SX 1991-92 Workshop Manual
Section
General › CHASSIS AND BODY MAINTENANCE - Nissan 240SX 1991-1992 Workshop Manual
QUICK REFERENCE INDEXCHASSIS AND BODY MAINTENANCE - Nissan 240SX 1991-1992 Workshop Manual

CHASSIS AND BODY MAINTENANCE

CHASSIS AND BODY MAINTENANCE

Tire Rotation

FRONT @ Do not include the T-type spare tire when rotating the tires. Wheel nuts: (©): 98 - 118 N-m (10.0 - 12.0 kg-m, 72 - 87 ft-lb)

SMA650B

Checking Steering Gear and Linkage

STEERING GEAR

@ Check gear housing and boots for looseness, damage or grease leakage. @ Check connection with steering column for looseness.

STEERING LINKAGE

@ Check ball joint, dust cover and other component parts for looseness, wear, damage or grease leakage. : Check grease leakage ac : Check tightening torque SMA851B

Checking Power Steering Fluid and Lines

F)

CHECKING FLUID LEVEL (WITHOUT SUPER HICAS

rc 176° - SYSTEM) Fluid level should be checked using “HOT” range on dipstick at (122 HOT: 50- HOT fluid temperatures of 50 to 80°C (122 to 176°F) or using ‘““COLD”’ COLD range on dipstick at fluid temperatures of 0 to 30°C (32 to 86°F). O.K,

CAUTION: - Do not overfill.

CHECKING FLUID LEVEL (WITH SUPER HICAS SYSTEM)

Maintain the fluid level so that the lower surface of the float is maintained between the “L” and ‘‘H” marks on the gauge rod. The fluid level should be checked when the engine is stopped and the fluid temperature is normal.

CAUTION: Do not overfill.

SST373B

CHECKING LINES

Check lines for improper attachment, leaks, cracks, damage, loose connections, chafing and deterioration.

$ST107B

MA-19

Parts & tools for this job For Nissan 240SX

As an Amazon Associate we earn from qualifying purchases.