CHECK AND ADJUSTMENT - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › CHECK AND ADJUSTMENT - Nissan 240SX 1991-1992 Workshop Manual
CHECK AND ADJUSTMENT
CHECK AND ADJUSTMENT
Checking Brake Fluid Level
(WUD DUO
@ Check fluid level in reservoir tank. It should be between Max. and Min. lines on reservoir tank. —> MAX @ If fluid level is extremely low, check brake system for leaks. —= MIN
II SBR991
Checking Brake System
@ Check brake lines (tubes and hoses) for cracks, deteriora- tion or other damage. Replace any damaged parts. If leakage occurs around joints, retighten or, if necessary, replace damaged parts. @ Check for oil leakage by fully depressing brake pedal.
SMA732A
Changing Brake Fluid
Drain brake fluid in each air bleeder valve.
1.
Refill until new brake fluid comes out of: each air bleeder
2. valve.
Use same procedure as in bleeding hydraulic system to refill
brake fluid. Refer to Bleeding Procedure. Refill with recommended brake fluid “DOT 3”. Never reuse drained brake fluid. Be careful not to splash brake fluid on painted areas. SBR992
BR-3
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.