INSTALLING HEADLAMP RUBBER CAP - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › INSTALLING HEADLAMP RUBBER CAP - Nissan 240SX 1991-1992 Workshop Manual
INSTALLING HEADLAMP RUBBER CAP
HEADLAMP Installation and Adjustment (Cont'd) ~~ 38
3. Adjust stopper. Adjusting screw we 1) Loosen lock nut on stopper. 2) Turn motor manual knob to open headlamp assembly com- pletely. Adjust stopper screw.
Adjusting screw SEL397L Headlamp Motor Check
1. Disconnect battery ground cable.
2. Disconnect the headlamp motor connector.
3. Use an ohmmeter to check for continuity in headlamp motor circuit while rotating motor with manual knob.
SEL398L
: SEL399L Up
INSTALLING HEADLAMP RUBBER CAP
When installing the rubber cap, set the ‘“TOP” or “a” mark so 4
“TOP” or “A! mark
that it is facing up.
=
Headlamp Rubber cap SEL495G Press the rubber cap firmly so that the lip makes contact with the headlamp body.
Headlamp
SEL841H
EL-39
Parts & tools for this job For Nissan 240SX
- PARTReplacement bulbsSearch: Nissan 240SX bulbs
- TOOLDigital multimeterSearch: automotive digital multimeter
As an Amazon Associate we earn from qualifying purchases.