TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
TROUBLE DIAGNOSES
TROUBLE DIAGNOSES
Electrical Components Inspection (Cont’d)
VEHICLE SPEED SENSOR
1. Jack up rear wheels. Use stands to support vehicle.
2. Disconnect vehicle speed sensor harness connector.
3. Check continuity between terminals @ and () while rotat- ing rear wheel by hand. Continuity should come and go. If N.G. replace vehicle speed sensor. = SEF754H
E.G.R. AND CANISTER CONTROL SOLENOID VALVE,
S.C.V. CONTROL SOLENOID VALVE AND A.I.V. CON-
TROL SOLENOID VALVE
Check air passage continuity.
| Air passage | Air passage | |
|---|---|---|
| Condition | continuity | continuity |
| 12V direct current sup- | between @ and | between @ and © |
| ply between terminals | Yes | No |
| @ and @ | ||
| No supply | No | Yes |
BATTERY
SEF335H
If N.G., replace solenoid valve.
E.G.R. CONTROL VALVE
E.G.R. control valve Apply vacuum to E.G.R. vacuum port with a hand vacuum pump. E.G.R. control valve spring should lift. If N.G., replace E.G.R. control valve.
SEF820F
B.P.T. VALVE
Plug one of two ports of B.P.T. valve. Apply a pressure above 0.490 kPa (50 mmH,0, 1.97 inH,O) to check for leakage. If a leak is noted, replace valve.
EC381A
EF & EC-185
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.