EVAPORATIVE EMISSION CONTROL SYSTEM - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › EVAPORATIVE EMISSION CONTROL SYSTEM - Nissan 240SX 1991-1992 Workshop Manual
EVAPORATIVE EMISSION CONTROL SYSTEM
EVAPORATIVE EMISSION CONTROL SYSTEM
Inspection (Cont’d) }
FUEL TANK VACUUM RELIEF VALVE
Wipe clean valve housing.
1. Suck air through the cap. A slight resistance accompanied
2. by valve clicks indicates that valve is in good mechanical condition. Note also that, by further sucking air, the resis- tance should disappear with valve clicks. If valve is clogged or if no resistance is felt, replace cap as
3. an assembly.
SEC308A
. Blow air through connector on fuel tank side.
FUEL CHECK VALVE
1. - Fuel tank side A considerable resistance should be felt and a portion of air flow should be directed toward the canister. Blow air through connector on canister side. air
2. Air flow should be smoothly directed toward fuel tank. @ ve! vapor If fuel check valve is suspected of not properly functioning
3. a eee side in steps 1 and 2 above, replace it. = > SEC309A
EF & EC-194
Parts & tools for this job For Nissan 240SX
- PARTExhaust gasketSearch: Nissan 240SX exhaust gasket
- TOOLPenetrating oilSearch: penetrating oil
- TOOLOBD2 scannerSearch: OBD2 scanner
As an Amazon Associate we earn from qualifying purchases.