TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
TROUBLE DIAGNOSES
TROUBLE DIAGNOSES
Diagnostic Procedure 1 (Cont'd)
© DISCONNECT | C.U. 10-pin &) connector N.G. Terminal
CHECK STOP SIGNAL.
Go to Diagnostic Procedure 3 | L.H. side: @ 43) 1) Move shoulder belt buckle to (See page BF-56.) and return to R.H. side: 42| \'_| center (not rear lock position next step. m\ Y/L and not front). 2) Check continuity. | Terminals L.H. side @ - Ground SBF344E R.H. side - Ground C.U. 10-pin €) 4 DISCONNECT =, Vata Continuity should exist. connector D | 37/39)
L.H. side
Refer to figure [€] to move shoulder belt buckle. Frontward operation O.K. LG/R i— N.G v 1) Disconnect 16-pin connector Go to Diagnostic Procedure 4 Rearward (See page BF-58.) and return to operation from control unit. 2) Check continuity. next step.
Terminals L.H. side @6) - Ground R.H. side
R.H. side
5) - Ground
Frontward operation Continuity should exist. O.K. i< 7 45) Rearward Vv 44/46)|
G/B operation
Yes Is this the second time? Replace control unit. Vv tX\B W/ No SBF341E Vv (H] Reinstall any part removed,
connector €)
C.U. 16-pin Vv Go to PROCEDURE 1 (START) Terminal L.H. side: @6) of Preliminary Check. R.H. side: @6) (See page BF-43.)
SBF345E
BF-53
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.