ENGINE LUBRICATION SYSTEM - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › ENGINE LUBRICATION SYSTEM - Nissan 240SX 1991-1992 Workshop Manual
ENGINE LUBRICATION SYSTEM
ENGINE LUBRICATION SYSTEM
Oil Pump (Cont’d)
OIL PRESSURE RELIEF VALVE INSPECTION
Inspect oil pressure relief valve for movement, cracks and Oil pressure relief valve breaks by pushing the ball. If replacement is necessary, remove valve by prying it out with a suitable tool. a new valve in place by tapping it. Install
Engine front >= ( | —~—_ ee . SLC476A
Front cover
Feeler —( ESS gauge Se 2 py @,® Straightedge SLC222A
OIL PUMP INSPECTION
Using a feeler gauge, check the following clearances. Standard clearance: Unit: mm (in) Body to outer gear clearance () «00... 0.114 - 0.20 (0.0045 - 0.0079) Inner gear to outer gear tip clearance (@) ...... 0.04 - 0.18 (0.0016 - 0.0071) Cover to inner gear clearance @) ..........:8 0.05 - 0.09 (0.0020 - 0.0035) Cover to outer gear clearance @) ........e 0.05 - 0.11 (0.0020 - 0.0043) . 0.045 - 0.091 (0.0018 - 0.0036) Inner gear to brazed portion clearance ©) Ifthe tip clearance (@) exceeds the limit, replace gear set. e
. e limit, replace front cover assembly.
If body to gear clearances (®, @, @, ©) exceed the
LC-6
Parts & tools for this job For Nissan 240SX
- PARTEngine gasket setSearch: Nissan 240SX engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
As an Amazon Associate we earn from qualifying purchases.