SUPER HICAS SYSTEM — Trouble Diagnoses - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › SUPER HICAS SYSTEM — Trouble Diagnoses - Nissan 240SX 1991-1992 Workshop Manual
SUPER HICAS SYSTEM — Trouble Diagnoses
SUPER HICAS SYSTEM — Trouble Diagnoses
Diagnostic Procedure 5
SYMPTOM: System is not set in self-diagnosis mode.
START
Vv O.K.
CHECK CONNECTOR CONTINUITY.
Poor connector connec- Disconnect steering angle sensor con- tion SST446B nector and control unit connector, and reconnect them firmly. Conduct self- ls diagnosis.
YYMONITOR ¥yNO FAIL
N.G. Okm/h’
CAR SPEED (REF)
BI} ) L8°
STEERING ANG
ON N.G.
NEUTRAL SIG
CHECK STOP LAMP INPUT SIG-
,| Malfunctioning stop lamp
OFF
STOP LAMP SW
ON NAL. switch system
PKB/CLUTCH SW
NEUTRAL SW
ON a \ Set CONSULT in DATA MONI-
ENG REV
UNDER 1500 TOR mode.
HICAS SOL
RO.OOA ON-OFF display FAILSAFE/V OFF RECORD | OR Check that stop lamp input is
[4] present at control unit. Brake ON: FAILSAFE NON
YY MONITOR ¥7NO FAIL
OFF Approximately 12V Brake OFF: OV O.K. IC y O.K.
WARNING LAMP
CHECK STEERING NEUTRAL
,| Replace control unit. RECORD |
POSITION SENSOR INPUT SIG-
NAL. Set CONSULT in DATA MONI- © SST728B TOR mode. ON-OFF display AE G) ® OR
(®) is present at control unit when
Check that steering neutral input
steering wheel is turned to the left and right at least 20° from the neutral position. R/G B Neutral position: [Vv | Approximately 5V When turned at least 20°: SST733B ov ns 4 € G) ® ®
LV] SST734B ST-59
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.