Adjustment (Cont'd) - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › Adjustment (Cont'd) - Nissan 240SX 1991-1992 Workshop Manual
Adjustment (Cont'd)
POWER STEERING GEAR AND LINKAGE (Model PR24SC)
Adjustment (Cont'd)
12. Measure pinion rotating torque within the range of + 100° KV48100700\ <7 from the neutral point. (J26364) Average rotating torque [(Max. measured value + Min. measured value) x 0.5]:
0.8 - 1.3 Nem (8 - 13 kg-cm, 6.9 - 11.3 in-Ib) Maximum torque increment: Less than 0.4 N-m (4 kg-cm, 3.5 in-Ib) Except for above mentioned measuring range: Maximum rotating torque ST3127S000 |
1.9 Nem (19 kg-cm, 16 in-Ib) — (See J25765-A) Maximum torque increment ST072B Less than 0.6 N-m (6 kg-cm, 5.2 in-Ib) @ If pinion rotating torque is not within specification, readjust it. @ After the readjustment, if pinion rotating torque is still out of specification, steering gear is damaged.
13. As a final check, measure rack sliding force and steering wheel turing force under normal operating conditions. Refer to Checking Steering Wheel Turning Force in ON-VEHICLE SERVICE.
ST-23
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.