TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
TROUBLE DIAGNOSES
TROUBLE DIAGNOSES
Diagnostic Procedure 1 (Cont'd)
® Vv
Yes_.) For such conditions, if wheel
Check if there are any condi- tions, among those listed below, speed is considerably different when symptom appears. between front and rear or left e Low friction road and right, ABS will work nor- e@ High speed cornering mally. @ Passing protrusion No ® da. y Yes Check whether engine speed is Vibration related to sensor may y over 5,000 rpm with vehicle cause ABS operation. stopped. No Vv Refer to preliminary Check 4 result. Go to Self-diagnosis. (See page BR-33.)
Diagnostic Procedure 2
SYMPTOM: Long stopping distance
Refer to worksheet results.
Yes
Stopping distance may be
Check if road condition is
longer than vehicles which
slippery with snow or gravel.
are not equipped with ABS.
No
Vv No
Disconnect actuator connector
Refer to Preliminary Check 4
SBR530A Vv.
and check whether stopping
result. distance is still long.
Go to Self-diagnosis. (See page
BR-33.) Yes ¥
Perform Preliminary Check 1
and air bleeding.
BR-39
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.