REPAIR FOR COMPONENT PARTS - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › REPAIR FOR COMPONENT PARTS - Nissan 240SX 1991-1992 Workshop Manual
‹ Prev REPAIR FOR COMPONENT PARTS - Nissan 240SX 1991-1992 Workshop ManualNext › REPAIR FOR COMPONENT PARTS - Nissan 240SX 1991-1992 Workshop Manual
QUICK REFERENCE INDEXREPAIR FOR COMPONENT PARTS - Nissan 240SX 1991-1992 Workshop Manual
REPAIR FOR COMPONENT PARTS
REPAIR FOR COMPONENT PARTS
Control Valve Assembly (Cont'd)
ASSEMBLY
1. Install upper and lower bodies.
a.
Place oil circuit of upper body face up. Install steel balls in
their proper positions.
Install reamer bolts from bottom of upper body and install
b. Reamer bolt
separate gaskets.
(long) © 00 0, 0.0 000, | 90 Oe 00 7” ° 0? e oo ° 5,0 oe? ° © 9 » af} 5 co00 0° ) 000 e °, 000 205°
Reamer bolt (short) SAT681A
c.
Place oil circuit of lower body face up. Install orifice check
spring, orifice check valve and pilot filter.
SAT682A
Install lower separate gaskets and separator plates on lower
d.
Orifice check valve
body.
Support plate
Install and temporarily tighten support plates, fluid tempera-
e.
ture sensor and tube brackets.
Unit: mm (in) SAT197B
AT-123
‹ Prev REPAIR FOR COMPONENT PARTS - Nissan 240SX 1991-1992 Workshop ManualNext › REPAIR FOR COMPONENT PARTS - Nissan 240SX 1991-1992 Workshop Manual
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.