INSPECTION (Model R200V) - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › INSPECTION (Model R200V) - Nissan 240SX 1991-1992 Workshop Manual
INSPECTION (Model R200V)
INSPECTION (Model R200V)
Contact Surfaces
Clean the disassembled parts in suitable solvent and blow
1. dry with compressed air. ad If following surfaces are found to be burred or scratched, smooth with oil stone. Differential case A 0 Differential case B Side gear Pinion mate gear eee Pinion mate shaft Check viscous coupling for oil leakage. If necessary, re- oe place it with new one.
Bearing
1. Thoroughly clean bearing.
2. Check bearings for wear, scratches, pitting or flaking. Check tapered roller bearing for smooth rotation. If dam- aged, replace outer race and inner cone as a set.
SPD715
PD-35
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.