Differential Carrier (Cont'd) - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › Differential Carrier (Cont'd) - Nissan 240SX 1991-1992 Workshop Manual
Differential Carrier (Cont'd)
ASSEMBLY
Differential Carrier (Cont'd)
11. Insert left and right side bearing adjusting washers in place between side bearings and carrier.
SPD924
12. Drive in side bearing spacer with Tool. c Side bearing Tool number: KV38100600 (J25267) | spacer
SPD559
13. Align mark on bearing cap with that on gear carrier and install bearing cap on gear carrier.
SPD889
14. Check runout of ring gear with a dial indicator. Runout limit: 0.05 mm (0.0020 in)
SPD524
15. Measure ring gear to drive pinion backlash with a dial indicator. Ring gear to drive pinion backlash: A
0.10 - 0.15 mm (0.0039 - 0.0059 in) If backlash is too small, decrease thickness of left shim and @ increase thickness of right shim by the same amount. a” Mi! If backlash is too great, reverse the above procedure. ws SN ily, Never change the total amount of shims as it will change the bearing preload. o Ww
SPD513 PD-29
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.