ENGINE LUBRICATION SYSTEM - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › ENGINE LUBRICATION SYSTEM - Nissan 240SX 1991-1992 Workshop Manual
ENGINE LUBRICATION SYSTEM
ENGINE LUBRICATION SYSTEM
Oil Pressure Check
WARNING: e Be careful not to burn yourself, as the engine and oil may hot. e Oil pressure check should be done in “Neutral” gear position.
Check oil level. —_
2. Remove oil pressure switch. — Ss
x. A | Intake manifold’ ~\ collector
i SLC475A
3. Install pressure gauge.
4. Start engine and warm it up to normal operating tempera- ture.
5. Check oil pressure with engine running under no-load. $T25051001 (J25695-1)
| Enai ngine rpm | Approximate discharge pressure kPa (kg/cm?, psi) |
|---|---|
| Idle speed | More than 78 (0.8, 11) |
| 3,000 | 412 - 481 (4.2 - 4.9, 60 - 70) |
$T25052000 (J25695-2) SLC926 If difference is extreme, check oil passage and oil pump for oil leaks.
6. Install oil pressure switch with sealant.
Oil Pump
REMOVAL
1. Remove front cover. Front cover Refer to “TIMING CHAIN” in section EM.
2. Remove oil pump cover.
SLC479A LC-4
Parts & tools for this job For Nissan 240SX
- PARTEngine gasket setSearch: Nissan 240SX engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
As an Amazon Associate we earn from qualifying purchases.