POWER SUPPLY ROUTING - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › POWER SUPPLY ROUTING - Nissan 240SX 1991-1992 Workshop Manual
POWER SUPPLY ROUTING
POWER SUPPLY ROUTING
Fuse
a. If fuse is blown, be sure to eliminate cause of problem allo
“lp lok
before installing new fuse.
b. Use fuse of specified rating. Never use fuse of more than | = specified rating. Co
c. Do not install fuse in oblique direction; always insert it
ao Oo
into fuse holder properly. :
d. Remove fuse for clock if vehicle is not used for a long period of time. Blown O.K. SEL954J
Fusible Link
\\ Fusible link A melted fusible link can be detected either by visual inspection or by feeling with finger tip. If its condition is questionable, use Circuit tester or test lamp.
CAUTION: If fusible link should melt, it is possible that critical circuit (power supply'or large current carrying circuit) is shorted. In such a case, carefully check and eliminate cause of problem. Never wrap periphery of fusible link with vinyl tape. SEL387L Extreme care should be taken with this link to ensure that it does not come into contact with any other wiring harness or vinyl or rubber parts.
EL-6
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.