Workshop Manuals Factory service & repair Nissan and Datsun
01 QUICK REFERENCE INDEX02 Front Cover03 Foreword04 Table of Contents05 General Information06 Windshield Header Trim07 Windshield Header Molding08 Weatherstrips and Retainers09 Rear Seat10 Quarter Trim Panel11 Quarter Window and Regulator12 Door and Door Window13 Seat Belts14 Back and Quarter Belt Moldings15 Headliner Assembly16 Top Cover Assembly17 Backlite Assembly18 Stay Pads, Side and Rear19 No. 1 Bow20 No. 2 Bow21 No. 3 Bow22 No. 4 Bow23 Rear and Side Rail24 Hydraulic System25 Electrical26 Deck Lid Hinge and Trunk Trim27 Body Structural28 Index29 Back Cover30 QUICK REFERENCE CHART
Nissan and Datsun Nissan 240SX 1991-92 Workshop Manual01 · QUICK REFERENCE INDEX
01 · General

ADJUSTMENT (Model R200) - Nissan 240SX 1991-1992 Workshop Manual

Make
Nissan and Datsun
Model
240SX Nissan 240SX 1991-92 Workshop Manual
Section
General › ADJUSTMENT (Model R200) - Nissan 240SX 1991-1992 Workshop Manual
QUICK REFERENCE INDEXADJUSTMENT (Model R200) - Nissan 240SX 1991-1992 Workshop Manual

ADJUSTMENT (Model R200)

ADJUSTMENT (Model R200)

Pinion Gear Height and Pinion Bearing Preload

(Cont'd)

— PINION HEIGHT ADJUSTING WASHER SELECTION —

11. Now, position the side bearing discs, J-25269-4, and arbor firmly into the side bearing bores. Install the side bearing caps and tighten the cap bolts to proper torque.

12. Select the correct standard pinion height adjusting washer thickness using a standard gauge of 3 mm (0.12 in) and your J-34309-101 feeler gauge. Measure the distance be- tween the J-34309-10 pinion height adapter and the arbor.

13. Write down your exact total measurement.

SPD775

14. Correct the pinion height washer size by referring to the “pinion head number.” There are two numbers painted on the pinion gear. The first one refers to the pinion and ring gear as a matched set and 4I © should be the same as the number on the ring gear. The second number is the ‘pinion head height number,” and it +2 refers to the ideal pinion height from standard for quietest operation. Use the following chart to determine the correct pinion height washer. Head number (H) SPD542

PD-22

Parts & tools for this job For Nissan 240SX

As an Amazon Associate we earn from qualifying purchases.