WINDSHIELD AND WINDOWS - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › WINDSHIELD AND WINDOWS - Nissan 240SX 1991-1992 Workshop Manual
WINDSHIELD AND WINDOWS
WINDSHIELD AND WINDOWS
Side Window
Side window is a molded type. During removal or installation,
observe the following instructions.
1. Cut sealant in the same manner as that outlined under
Wire “‘Windshield.”’. Be careful not to scratch molding when cutting sealant. If Side
2. window molding is scratched, repair.
3. Remove clips and locating pins which have been exposed from vehicle body.
Sealant \ Side window Body panel
Wire
SBF375E FASTBACK Sealant portion BI Sealant portion \ hs () ON Double-faced — adhesive tape @. b= oN Vi Sealant portion
:
More than
1B 7 (0.28) More than 25 12 (0.47) (0.98) a More than ,
Body panel
, 7 (0.28) 1
More than
[ 12 (0.47) (0.51) Body panel Body panel More than \ 12 (0.47) (0.51) ~ 13 More than . 7 (0.28) Unit: mm (in) Unit: mm (in) Unit: mm (in) SBF203E
BF-65
Parts & tools for this job For Nissan 240SX
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Nissan touch up paint
- PARTPanel clip assortmentSearch: Nissan panel clips assortment
As an Amazon Associate we earn from qualifying purchases.