Workshop Manuals Factory service & repair Nissan and Datsun
01 QUICK REFERENCE INDEX02 Front Cover03 Foreword04 Table of Contents05 General Information06 Windshield Header Trim07 Windshield Header Molding08 Weatherstrips and Retainers09 Rear Seat10 Quarter Trim Panel11 Quarter Window and Regulator12 Door and Door Window13 Seat Belts14 Back and Quarter Belt Moldings15 Headliner Assembly16 Top Cover Assembly17 Backlite Assembly18 Stay Pads, Side and Rear19 No. 1 Bow20 No. 2 Bow21 No. 3 Bow22 No. 4 Bow23 Rear and Side Rail24 Hydraulic System25 Electrical26 Deck Lid Hinge and Trunk Trim27 Body Structural28 Index29 Back Cover30 QUICK REFERENCE CHART
Nissan and Datsun Nissan 240SX 1991-92 Workshop Manual01 · QUICK REFERENCE INDEX
01 · General

TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual

Make
Nissan and Datsun
Model
240SX Nissan 240SX 1991-92 Workshop Manual
Section
General › TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
QUICK REFERENCE INDEXTROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual

TROUBLE DIAGNOSES

TROUBLE DIAGNOSES

Final Check (Cont'd)

PRESSURE TESTING

@ Location of line pressure test port @ Line pressure plugs are hexagon headed bolts. @ Always replace line pressure plugs as they are self- sealing bolts.

Test port for D, 2 and 1 ranges SAT782A Line pressure test procedure

1. Check A/T and engine fluid levels. If necessary, add.

2. Warm up engine until engine oil and A.T.F. reach operating temperature after vehicle has been driven approx. 10 min- utes. A.T.F. operating temperature: 50 - 80°C (122 - 176°F)

SAT779A

3. Install pressure gauge to line pressure port. — D, 2 and 1 ranges —

$T2505S001 (J25695-A) SAT180B — R range —

$T2505S001 (J25695-A) SAT181B

4. Set parking brake and block wheels. @ Continue to depress brake pedal fully while line pressure test at stall speed is performed.

SAT597 AT-78

Parts & tools for this job For Nissan 240SX

As an Amazon Associate we earn from qualifying purchases.