TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
TROUBLE DIAGNOSES
TROUBLE DIAGNOSES
A/T Shift Lock System (Cont'd)
®)
CHECK INPUT SIGNAL
N.G. Brake pedal Check the following items:
(DETENTION SWITCH—KEY).
1. Harness continuity between G control unit harness terminal (2 and detention switch har- ness terminal (2)
2. Harness continuity between fe] 1. Check voltage between detention switch harness control unit harness ter- terminal (}) and key switch minal (2 and ground with harness terminal ((}) brake pedal depressed and Control unit |
3. Detention switch—key terminal LW selector lever button (Refer to “COMPONENT pushed. CHECK”.) Battery voltage should exist. , fe] 2. Check voltage between control unit harness ter- minal (2 and ground with Brake pedal selector lever set in any position except ‘’P’’. Battery voltage should SAT995D exist. O.K. 10 Set selector lever to ‘’P’’ posi- tion and release selector lever button.
SAT631C i ) 4 @ N.G. Check harness continuity
CHECK OUTPUT SIGNAL.
Vv between shift lock solenoid
(KEY LOCK SIGNAL).
harness terminal and control Key lock solenoid @ ¥o> unit harness terminal (8). 8}! harness connector IK O.K. N.G, L/R Check voltage between key lock Repair harness or solenoid harness terminal connector. and ground at the moment ignition key is turned from OFF to ON. = SAT612C Battery voltage should exist for Replace control unit. approximately 0.1 seconds. O.K.
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.