FUEL SYSTEM - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › FUEL SYSTEM - Nissan 240SX 1991-1992 Workshop Manual
FUEL SYSTEM
FUEL SYSTEM
WARNING: When replacing fuel line parts, be sure to observe the following: Put a “CAUTION: INFLAMMABLE” sign in workshop. Do not smoke while servicing fuel system. Keep open flames and sparks away from work area. Be sure to disconnect battery ground cable before conducting operations. Be sure to furnish workshop with a CO: fire extinguisher. Put drained fuel in an explosion-proof container and put lid on securely. AUTION: For electric fuel pump model, before disconnecting fuel hose, release fuel pressure from fuel line. Refer eo to “Fuel Filter Replacement” in MA section. Do not disconnect any fuel line unless absolutely necessary. Plug hose and pipe openings to prevent entry of dust or dirt. Always replace O-ring and clamps with new ones. Do not kink or twist hose and tube when they are installed. Do not tighten hose clamps excessively to avoid damaging hoses. When installing fuel check valve, be careful of its designated direction. (Refer to section EF & EC.) Run engine and check for leaks at connections.
File Oe O
_- C O-" Fuel return hose Fuel outlet hose ©) 3.2-43 (0.33 - 0.44,
2.4 - 3.2)
NN Fuel tank
Fuel check valve
Fuel tank protector
\—(U) 3.2 - 4.3 (0.33 - 0.44, 2.4 - 3.2)
(O} 26 - 36 (2.7 - 3.7, 20 -27) (CO) : N-m (kg-m, ft-lb)
SFE013A
FE-3
Parts & tools for this job For Nissan 240SX
- PARTFuel filterSearch: Nissan 240SX fuel filter
- TOOLFuel pressure test kitSearch: fuel pressure test kit
- TOOLFuel line disconnect toolSearch: fuel line disconnect tool
As an Amazon Associate we earn from qualifying purchases.