REPAIR FOR COMPONENT PARTS - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › REPAIR FOR COMPONENT PARTS - Nissan 240SX 1991-1992 Workshop Manual
REPAIR FOR COMPONENT PARTS
REPAIR FOR COMPONENT PARTS
Control Valve Upper Body (Cont'd)
DISASSEMBLY
1. Remove valves at parallel pins. @ Do not use a magnetic hand.
a. Use a wire paper clip to push out parallel pins.
b. Remove parallel pins while pressing their corresponding plugs and sleeves. @ Remove plug slowly to prevent internal parts from jumping out.
c. Place mating surface of valve facedown, and remove internal parts. @ If a valve is hard to remove, place valve body facedown and lightly tap it with a soft hammer. @ Be careful not to drop or damage valves and sleeves.
SAT824A
2. Remove valves at retainer plates.
a. Pry out retainer plate with wire paper clip.
Retainer plate SAT825A
AT-133
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.