TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
TROUBLE DIAGNOSES
TROUBLE DIAGNOSES
A/T Shift Lock System (Cont'd)
®
N.G,
CHECK INPUT SIGNAL
Brake pedal Check the following items: A
(DETENTION SWITCH—KEY).
1. Harness continuity between “ control unit harness terminal
(2 and detention switch har-
; ness terminal (2
2. Harness continuity between fe] 1. Check voltage between detention switch harness control unit harness ter- LX | o | terminal (}) and key switch minal (2 and ground with L |_| 12 harness terminal ((}) brake pedal depressed and Control unit fw
3. Detention switch—key selector lever button terminal (Refer to “COMPONENT pushed. CHECK”) Battery voltage should exist. , . Check voltage between control unit harness ter- minal @2 and ground with Brake pedal selector lever set in any position except ‘’P’’. Battery voltage should SAT995D exist. O.K. 10 Set selector lever in ‘’P’’ posi- tion and release selector lever button.
y (Gt; SAT631C 4 &. N.G. Check harness continuity
CHECK OUTPUT SIGNAL
Vv between shift lock solenoid
(KEY LOCK SIGNAL).
harness terminal (8) and control O_|! Key lock solenoid
18 || harness connector
unit harness terminal . N.G. O.K. L/R Check voltage between key lock Repair harness or solenoid harness terminal connector. and ground at the moment ignition key is turned from OFF to ON. A SAT612C Battery voltage should exist for Replace control unit. approximately 0.1 seconds. O.K.
© AT-97
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.