ASSEMBLY (Model R200) - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › ASSEMBLY (Model R200) - Nissan 240SX 1991-1992 Workshop Manual
ASSEMBLY (Model R200)
ASSEMBLY (Model R200)
Differential Carrier (Cont'd)
4. Place pinion front bearing inner cone in final drive housing.
eS Tan — SPD581
5. Set drive pinion assembly (as shown in figure at left) in Drive pinion differential carrier and install drive pinion, with press and Pinion bearing adjusting spacer suitable tool. Pinion bearing Stop when drive pinion touches bearing. adjusting washer Apply multi-purpose grease to pinion rear bearing inner race, pinion front bearing inner race and front pilot bearing. p
9° Pinion front bearing inner race SPD897
L Suitable spacer sPD896
6. Apply multi-purpose grease to cavity at sealing lips of oil seal. Install front oil seal with Tool. Tool number: KV38100500 ( — _ )
SPD557
7. Install companion flange, and tighten pinion nut to specified torque with Tool. Ascertain that threaded portion of drive pinion and pinion nut are free from oil or grease. Tool number: ST38060002 (J34311)
PD416
PD-27
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.