TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
TROUBLE DIAGNOSES
TROUBLE DIAGNOSES
Diagnostic Procedure 18 — Detonation
Blow-by Yes
Discover air leak location Vv and repair. When pinching blow-by hose (lowering C 2 the blow-by air supply), does the en- gine rpm rise? No ¥ No SEF300G
CHECK FOR INTAKE AIR LEAK.
Check E.G.R. control Vv
CHECK E.G.R. OPERATION.
1. Apply vacuum directly to the E.G.R. valve for sticking. E.G.R. control valve using a handy vacuum control valve pump.
2. Check to see that the engine runs rough or dies. Yes Vv N.G. Check solenoid valve and
CHECK E.G.R. CONTROL SOLENOID
Vv VALVE. circuit.
1. Select “E.G.R. CONT SOL VALVE” in ‘‘ACTIVE TEST” SEF820F mode.
2. Turn E.G.R. and canister con-
@ active test @
[] trol solenoid valve ON and
EGR CONT sot_jvv ON
OFF.
3. Check operating sound. OR — 675rpm
CAS-RPM (REF)
. Disconnect E.G.R. and canis- ter control solenoid valve har- ness connector.
2. Supply E.G.R. and canister GROIN
| onvorF |[ OFF
| control solenoid valve termi- SEF734K nals with battery current and check operating sound. O.K. 4) ¥ N.G.
CHECK VACUUM HOSES.
p| Repair or replace. Check the following vacuum hoses for clogging, cracks and poor connection. a) Vacuum hose between E.G.R. con- BATTERY trol valve and E.G.R. and canister control solenoid valve. b) Vacuum hose between E.G.R. and SEF991K canister control solenoid valve and throttle chamber port. c) Vacuum hose between E.G.R. and canister control solenoid valve and air duct. ys
(Go to @ on next page.)
EF & EC-89
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.