CYLINDER HEAD - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › CYLINDER HEAD - Nissan 240SX 1991-1992 Workshop Manual
CYLINDER HEAD
CYLINDER HEAD
Inspection (Cont’d)
VALVE SPRING
S (Out-of-square) Squareness
1. Measure ‘‘S” dimension. Out-of-square: Less than 1.9 mm (0.075 in)
2. If it exceeds the limit, replace spring.
SEM288A Pressure Check valve spring pressure. Pressure: N (kg, Ib) at height mm (in) Standard 548.70 (55.95, 123.37) at 26.0 (1.024) Limit More than 489.4 (49.9, 110.0) at 26.0 (1.024) If it exceeds the limit, replace spring.
VALVE LIFTER AND VALVE SHIM
1. Visually check contact and sliding surfaces for wear or scratches. ¥. +
2. Check diameter of valve lifter and valve lifter guide bore. Valve lifter diameter:
33.960 - 33.975 mm (1.3370 - 1.3376 in)
SEM161D Lifter guide bore diameter:
34.000 - 34.021 mm (1.3386 - 1.3394 in) Valve lifter to valve lifter guide clearance:
0.025 - 0.061 mm (0.0010 - 0.0024 in)
€ Engine front SEM303D EM-30
Parts & tools for this job For Nissan 240SX
- PARTEngine gasket setSearch: Nissan 240SX engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
As an Amazon Associate we earn from qualifying purchases.