TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
TROUBLE DIAGNOSES
TROUBLE DIAGNOSES
Diagnostic Procedure 1 — High Idling after
Warm-up Air regulator 1 Yes
,| Check air regulator. (See a "|
CHECK AIR REGULATOR.
page EF & EC-160.)
When pinching the air regulator hose, does the engine speed drop? SI
Pinching |
No Vv Yes
Discover air leak location . > SEF963K =
CHECK INTAKE AIR LEAK.
1. Select ‘“SELF-LEARNING and repair. CONT” in “ACTIVE TEST”’ mode.
Bactive test g
LJ
2. Clear the self-learning control SELF-LEARN 100% coefficient by touching CONTROL “CLEAR”. <ss5S55>=> MONITOR =ss=S=>==
3. Does the engine speed drop?
725rpm— 84°C OR
CAS-RPM (REF)
ENG TEMP SEN
0.80V
EXH GAS SEN
(Se) 1. Disconnect exhaust gas sen-
112% sor harness connectors. | CLEAR |
A/F ALPHA
2. After racing engine at 2,000 rpm under no load for about SEF728K 30 seconds, does the engine speed drop? No OISCONMECT v Exh €& 3 4 N.G.
CHECK THROTTLE LINKAGE.
»| Repair throttle linkage or sensor xhaust gas b= 20 alia, “4
1. Check that throttle linkage moves sticking of throttle valve. smoothly.
2. Confirm that throttle valve both fully c L i 0” 6 opens and fully closes. O.K. SEF375] Vv
INSPECTION END
( SEF739K
EF & EC-58
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.