REPAIR FOR COMPONENT PARTS - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › REPAIR FOR COMPONENT PARTS - Nissan 240SX 1991-1992 Workshop Manual
REPAIR FOR COMPONENT PARTS
REPAIR FOR COMPONENT PARTS
Low & Reverse Brake
Needle bearing
24 MEER ©
Low & reverse brake piston
Low one-way D-ring OD clutch inner race
Oil seal (59
. Spring Snap ring retainer Retaining plate * Seal ring Og =
Driven plate
©
ye spring ro La ! { h plat Dish plate - 26 Nem \
me 1 - 2.7 kg-m,
15 - 20 ft-lb) \
Drive plate ATF)
Direction of
dish plate
Driven plate Direction of oil seal
C.. \ a
CTF): Apply ATE.
®: Apply petroleum jelly. } Dish plate % : Select with : ith proper thickness hick . Drive plate i SAT849B
DISASSEMBLY
1. Check operation of low and reverse brake.
a. Install seal ring onto oil pump cover and install reverse clutch. Apply compressed air to oil hole.
b. Check to see that retaining plate moves to snap ring.
c. If retaining plate does not move to snap ring, D-ring or oil seal may be damaged or fluid may be leaking at piston check ball.
2. Remove snap ring, low and reverse brake drive plates, driven plates and dish plate.
SAT873A
AT-150
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.