Assembly (Cont'd) - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › Assembly (Cont'd) - Nissan 240SX 1991-1992 Workshop Manual
Assembly (Cont'd)
ASSEMBLY
Assembly (Cont'd)
3. Install front side clutch and gear components.
a. Install rear sun gear on transmission case. @ Pay attention to its direction.
SAT974A Make sure needle bearing is on front of front planetary carrier. Apply petroleum jelly to needle bearing. Make sure needle bearing is on rear of front planetary carrier. Apply petroleum jelly to bearing. Pay attention to its direction — Black side goes to front. e@e°etT
Black side goes to front. SAT967A
d. While rotating forward clutch drum clockwise, install front planetary carrier on forward clutch drum.
SAT9I69A
@ Check that portion A of front planetary carrier protrudes
approximately 2 mm (0.08 in) beyond portion B of forward Front planetary carrier clutch assembly.
Portion A—=m Forward clutch drum Portion B—— SAT970A
e. Make sure bearing races are on front and rear of clutch pack. EA © @ Apply petroleum jelly to bearing races. @ Securely engage pawis of bearing races with holes in clutch pack.
a“ J Front Rear SAT971A AT-177
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.