REPAIR FOR COMPONENT PARTS - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › REPAIR FOR COMPONENT PARTS - Nissan 240SX 1991-1992 Workshop Manual
REPAIR FOR COMPONENT PARTS
REPAIR FOR COMPONENT PARTS
Forward and Overrun Clutches (Cont’d)
@ Removal and installation of return springs
KV31102400 (J34285 and J34285-87) SAT864A
@ Inspection of forward clutch and overrun clutch return
springs Unit: mm (in) diameter Inspection standard: D Part No. Q Outer : D
9.7 (0.382) 31505-41X01
35.77 (1.4083) : Free length Q Lene - —_ SAT829A @ Inspection of forward clutch drive plates Thickness Thickness of drive plate: Standard
2.0 mm (0.079 in) Facing Wear limit
1.8 mm (0.071 in) Core plate
SAT845A @ Inspection of overrun clutch drive plates Thickness Thickness of drive plate: Standard
2.0 mm (0.079 in) Facing Wear limit
1.8 mm (0.071 in) Core plate
SAT845A
@ Installation of forward clutch piston and overrun clutch
piston |
Install forward clutch piston by turning it slowly and evenly.
1.
@ Apply A.T.F. to inner surface of clutch drum.
SAT866A AT-141
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.