REMOVAL AND INSTALLATION - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › REMOVAL AND INSTALLATION - Nissan 240SX 1991-1992 Workshop Manual
‹ Prev REMOVAL AND INSTALLATION - Nissan 240SX 1991-1992 Workshop ManualNext › REMOVAL AND INSTALLATION - Nissan 240SX 1991-1992 Workshop Manual
QUICK REFERENCE INDEXREMOVAL AND INSTALLATION - Nissan 240SX 1991-1992 Workshop Manual
REMOVAL AND INSTALLATION
REMOVAL AND INSTALLATION
Removal (Cont'd)
@ Remove bolts securing torque converter to drive plate. Gain access to bolts by turning crankshaft.
@ Support A/T assembly by placing a jack under oil pan. @ Remove rear mounting bracket from body.
@ Lower A/T assembly as much as possible. @ Remove oil cooler pipe from left side of A/T assembly. Plug up openings.
@ Remove bolts securing A/T assembly to engine. @ Remove and lower A/T assembly. Be careful not to damage steering gear and tubes.
AT-104
‹ Prev REMOVAL AND INSTALLATION - Nissan 240SX 1991-1992 Workshop ManualNext › REMOVAL AND INSTALLATION - Nissan 240SX 1991-1992 Workshop Manual
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.