SUPER HICAS SYSTEM — Trouble Diagnoses - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › SUPER HICAS SYSTEM — Trouble Diagnoses - Nissan 240SX 1991-1992 Workshop Manual
SUPER HICAS SYSTEM — Trouble Diagnoses
SUPER HICAS SYSTEM — Trouble Diagnoses
Diagnostic Procedure 5 (Cont'd)
® Vv O.K.
CHECK STEERING NEUTRAL
,| Repair or replace harness be- |
POSITION SENSOR OUTPUT
tween control unit and steering my O SIGNAL. angie sensor. 7] Check that steering neutral out- put is present when steering wheel is turned to the left and Y/B Mw right at least 20° from the neu- tral position. SST735B Neutral position: Approximately 5V When turned at least 20°: OV N.G.
Vv O.K. p| Replace steering angle sensor.
CHECK STEERING ANGLE
SENSOR POWER SUPPLY.
1) Turn ignition switch
2) Measure voltage across | G/Y steering angle sensor connector terminal IGN \ ) oO and ground. Voltage: Approximately 12V
CHECK STEERING ANGLE
= SS1736B
SENSOR GROUND CIR-
CUIT. Check continuity between steering angle sensor ter- minal GND and body metal (ground). Continuity should exist. N.G. Vv Check and repair power supply harness or ground harness. ~ §81737B
ST-71
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.