TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › TROUBLE DIAGNOSES - Nissan 240SX 1991-1992 Workshop Manual
TROUBLE DIAGNOSES
TROUBLE DIAGNOSES
Diagnostic Procedure 9 — Hesitation under
1
Normal Conditions
1
CHECK SPARK PLUGS.
N.G. Repair or replace Spark plug(s). Remove spark plugs and check for fouling, etc. O.K. v
CHECK EXHAUST GAS SENSOR.
Yes y
Replace exhaust gas sen- =>
1. See “M/R F/C MNT” in sor(s). SEF879J “DATA MONITOR” mode.
2. Maintaining engine at 2,000
YWMONITOR WNOFAL []
rpm under no-load (with en-
CAS-RPM (REF)
2000rpm gine warmed up Sufficiently.),
M/R F/C MNT
RICH check to make sure that the monitor fluctuates between “LEAN” and ‘RICH’ more than 5 times during 10 sec- onds. | RECORD |
RICH->LEAN >RICH—>
1 time 2 times SEF722K LEAN—RICH....... OR is 1. Set ‘Exhaust gas sensor
Os) monitor’’ in the self-diagnostic
Mode II. (See page EF & EC-
45.)
2. Maintaining engine at 2,000 rpm under no load, check that check engine light or RED LED on the E.C.U. goes ON Check engine light and OFF more than 5 times
RED L.E.D
during 10 seconds. SEF621K No
cE Nacuum line
SILK / d |
‘
CHECK CANISTER PURGE.
Yes > Check purge and vacuum rae line 7 if
Vapor line |
1. Disconnect canister purge line hose lines. TMSh and plug hose.
2. Perform cruise test.
3. Does the hesitation disappear? No 4 v — 4
CHECK FOR INTAKE AIR LEAK.
Yes > Discover air leak location Carbon canister - ~TMN TM=“—~ SEF750K When pinching blow-by hose (lowering and repair. the blow-by air supply), does the en- gine speed rise? No Vv
INSPECTION END
SEF300G
EF & EC-72
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.