Hinge Body ali | - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › Hinge Body ali | - Nissan 240SX 1991-1992 Workshop Manual
Hinge Body ali |
DOOR
—_ B , Holder handle.
Hinge Body ali |
> ustment
escutcheon Ze
r ta
0.5-1.5mm Release (0.020 - 0.059 in) lever Holder
Outside handle adjustment (Turn holder as the clearance —() 29-37 between holder and rod is (3.0 - 3.8, 22 - 27) specified value.)
Striker adjustment
Escutcheon
¥ A stn shim
[t= 1.0 mm (0.039 in)] handle
Glass portion @ Remove weatherstrip from retainer. e Adjust to provide proper light surface contact of glass and retainer.
Weatherstrip @ Door glass-to-retainer clearances A and B retainer Adjust so that clearances A and B are equal. e@ Ensure door glass is not tilted.
12.0-145 mm (0.472 - 0.571 in) Outside Weatherstrip ~Y retainer Door glass Glass portion fj Glass portion
Weatherstrip retainer
7. glass
we Regulator
assembly
Z pod panel
75-95 mm (0.295 - 0.374 in)
MBF445A
BF-10
Parts & tools for this job For Nissan 240SX
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Nissan touch up paint
- PARTPanel clip assortmentSearch: Nissan panel clips assortment
As an Amazon Associate we earn from qualifying purchases.