METHODS OF PREVENTING OVER-DISCHARGE - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › METHODS OF PREVENTING OVER-DISCHARGE - Nissan 240SX 1991-1992 Workshop Manual
METHODS OF PREVENTING OVER-DISCHARGE
BATTERY
CAUTION:
a. If it becomes necessary to start the engine with a booster battery and jumper cables, use a 12-volt booster battery.
b. After connecting battery cables, ensure that they are tightly clamped to battery terminals for good contact.
c. Never add distilled water through the hole used to check specific gravity.
How to Handle Battery Keep clean and dry.
METHODS OF PREVENTING OVER-DISCHARGE
The following precautions must be taken to prevent over-dis- charging a battery.. e The battery surface (particularly its top) should always be kept clean and dry. If the top surface of a battery is wet with electrolyte or water, leakage current will cause the battery to discharge.
Always keep the battery clean and dry.
SEL711E e When the vehicle is not going to be used over a long period Remove negative of time, disconnect the negative battery terminal. (If the vehicle has an extended storage switch, turn it off.) fe = i
SEL712E e@ Check the charge condition of the battery. Hydrometer Periodically check the specific gravity of the electrolyte. Keep a close check on charge condition to prevent over- discharge.
Q@ SEL442D
EL-7
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.