REPAIR FOR COMPONENT PARTS - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › REPAIR FOR COMPONENT PARTS - Nissan 240SX 1991-1992 Workshop Manual
REPAIR FOR COMPONENT PARTS
REPAIR FOR COMPONENT PARTS
Low & Reverse Brake
Needle bearing 629 © Low & reverse brake piston Low one-way D-ring €39 ATE Es e\ 0
Seal ring
clutch inner race Oil seal 9 GTP Spring Snap ring retainer Retaining plate *
Driven plate
\ io REY ' Return spring |_ sP Dish plate 21 - 26 Nem (2.1 - 2.7 kg-m, 15 - 20 ft-lb) SS
Direction of
QT dish plate
Driven plate Direction of oil seal
= (ATF): Apply ATF. ®: Apply petroleum jelly. | Dish plate i *% : Select with : Sel ith proper thick thickness . Drive plate SAT849B
DISASSEMBLY Check operation of low and reverse brake.
1.
Install seal ring onto oil pump cover and install reverse
a. clutch. Apply compressed air to oil hole.
b. Check to see that retaining plate moves to snap ring.
If retaining plate does not move to snap ring, D-ring or oil
c.
seal may be damaged or fluid may be leaking at piston
check ball.
Remove snap ring, low and reverse brake drive plates,
2. driven plates and dish plate.
SAT873A AT-143
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.