Workshop Manuals Factory service & repair Nissan and Datsun
01 QUICK REFERENCE INDEX02 Front Cover03 Foreword04 Table of Contents05 General Information06 Windshield Header Trim07 Windshield Header Molding08 Weatherstrips and Retainers09 Rear Seat10 Quarter Trim Panel11 Quarter Window and Regulator12 Door and Door Window13 Seat Belts14 Back and Quarter Belt Moldings15 Headliner Assembly16 Top Cover Assembly17 Backlite Assembly18 Stay Pads, Side and Rear19 No. 1 Bow20 No. 2 Bow21 No. 3 Bow22 No. 4 Bow23 Rear and Side Rail24 Hydraulic System25 Electrical26 Deck Lid Hinge and Trunk Trim27 Body Structural28 Index29 Back Cover30 QUICK REFERENCE CHART
Nissan and Datsun Nissan 240SX 1991-92 Workshop Manual01 · QUICK REFERENCE INDEX
01 · General

Service Tools (Cont'd) - Nissan 240SX 1991-1992 Workshop Manual

Make
Nissan and Datsun
Model
240SX Nissan 240SX 1991-92 Workshop Manual
Section
General › Service Tools (Cont'd) - Nissan 240SX 1991-1992 Workshop Manual
QUICK REFERENCE INDEXService Tools (Cont'd) - Nissan 240SX 1991-1992 Workshop Manual

Service Tools (Cont'd)

PREPARATION

Service Tools (Cont'd)

Low pressure . High pressure

HANDLING METHOD AND STRUCTURE

compound gauge compound gauge Manifold gauge The manifold gauge is used to measure the operating pressure accurately in the high pressure and low pressure lines of the High refrigerating system. Low pressure ve The high pressure gauge measures from —101.3 kPa (—/60 valve cock cock mmHg, —29.92 inHg) to 2,942 kPa (30 kg/cm’, 427 psi), and the A low pressure gauge measures generally from —101.3 kPa (—760 mmHg, —29.92 inHg) to 1,471 kPa (15 kg/cm’, 213 psi). Blind plug | ~CAUTION: @ When installing the gauge to the refrigerating system, use Inner valve Blind Vacuum utmost care not to mistake high pressure and low pressure incorporated | val k . . . . plug alve coc line connections. (Wrong connections will lead to a dam- aged gauge.) Center joint (A): Use for evacuating. e Before evacuating, confirm that the gauge has a negative High pressure side joint (B): pressure scale. (If not, the gauge will be damaged.) Connect to high pressure side service valve of refrigerating system, Low pressure side joint (C): Connect to low pressure side service valve of refrigerating system. Refrigerant joint (D): Use for charging refrigerant. RHAS80B

Charging hose

1. Completely tighten the high pressure valve, low pressure valve and vacuum pump valve cocks of the gauge manifold.

2. Connect the charging hoses to the high and low pressure lines.

3. Connect the charging hose fitted with a valve core to the refrigerant canister.

4. Connect the charging hose to the vacuum pump. The high and low pressure hoses are color coded to prevent wrong connection.

High pressure line hoseRed
Low pressure line hoseYellow
Refrigerant canister hoseBlue or green (with valve core)
Vacuum pump hoseBlue or green

CAUTION: e Check each hose for cracks. If found, discard the hose. e Do not use any hose if bulges are found. e@ Check the rubber packing. If any deterioration or cracks are found, replace it with a new one.

(straight end)

Packing RHAS81B HA-22

Parts & tools for this job For Nissan 240SX

As an Amazon Associate we earn from qualifying purchases.