Gear Components (Cont'd) - Nissan 240SX 1991-1992 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 240SX Nissan 240SX 1991-92 Workshop Manual
- Section
- General › Gear Components (Cont'd) - Nissan 240SX 1991-1992 Workshop Manual
Gear Components (Cont'd)
ASSEMBLY
Gear Components (Cont'd)
Install steel ball and 1st gear washer.
c.
Apply multi-purpose grease to steel ball and 1st gear
washer before installing.
SMT403A
6. Install mainshaft and counter gear on adapter plate and main drive gear on mainshaft.
a. Press mainshaft assembly to adapter plate with Tool.
KV31100401
TM439
b. Press counter gear into adapter plate with Tool.
c. Install 3rd main gear and then press 3rd & 4th synchronizer assembly.
d the re DC
@ Pay attention to direction of 3rd & 4th synchronizer.
Spread spring Rear side
d. Install thrust washer on mainshaft and secure it with mainshaft front snap ring. Select proper snap ring to minimize clearance of groove in mainshaft. Allowable clearance of groove: 0 - 0.18 mm (0 - 0.0071 in) Mainshaft front snap ring: Refer to S.D.S.
e. Apply gear oil to mainshaft pilot bearing and install it on . mainshaft. TM441 MT-21
Parts & tools for this job For Nissan 240SX
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Nissan 240SX
As an Amazon Associate we earn from qualifying purchases.